Rigol DP832A 195 W Power Supply

Rigol DP832A 195 W Power Supply

Power Supply

Add to wishlist
£817.20 Inclusive of VAT
Out of Stock
Sold Out
Free Delivery Free Amazon Voucher Half Price Calibration 3 Year Warranty

About the Rigol DP832A 195 Watt Power Supply 

The Rigol DP832A Power Supply combines the ability to source, analyse, and coordinate over time in a powerful new package. The Rigol DP832A is a power supply system with 3 channel outputs and up to 195 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications. New digital triggering between instruments also makes it possible to reliably combine and connect supplies together. Intuitive to use for everything from education labs to the R & D bench, the Rigol DP832A power supply provides incredible value for any application.

Rigol DP832A Key Features

  • 3 Outputs; total power up to 195W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Channel isolation: CH1 || CH2,CH3
  • OVP/OCP/OTP protection functions
  • Built in V, A, W measurements and waveform display
  • Support for output Delay, Analysis, Monitor, and Preset functions
  • 3.5 inch TFT Display
  • Connectivity including USB Host & Device with LXI option

Rigol DP832A Accessories Included

  • Spare Fuses 
  • USB Data Cable
  • Power Cord
  • Instrument Quick Guide
  • Free Firmware Verification
  • Free PDI and Saftey Test
  • 3 Year Warranty
  • £10 Amazon Voucher
Channels 3
DC Output (0°C to 40°C )

CH1: 0 to 30V/0 to 3A
CH2: 0 to 30V/0 to 3A
CH3: 0 to 5V/0 to 3A


CH1: 1mV to 33V/1mA to 3.3A
CH2: 1mV to 33V/1mA to 3.3A
CH3: 1mV to 5.5V/1mA to 3.3A

Load Regulation Rate ±(Output Percentage + Offset)




Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current <1.5μArms
Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)

Voltage: 0.05% + 10mV

Current: 0.2% + 10mA


Voltage: 0.05% + 5mV

Current: 0.15%+ 5mA




Voltage: 1mV

Current: 1mA


Voltage: 0.1mV

Current: 0.1mA


Voltage: 1mV

Current: 1mA

Transient Response Time


Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa
Command Processing Time [2]
Temperature Coefficient per? (Output Percentage + Offset)
Voltage CH1/CH2: 0.01%+5mV
CH3: 0.01%+2mV
Current 0.01%+2mA
Stability [3] ±(Output Percentage + Offset)
Voltage CH1/CH2: 0.02%+2mV
CH3: 0.01%+1mV
Current 0.05%+2mA